|
michele.p
|
 |
« Risposta #30 inserita:: Marzo 23, 2009, 07:05:29 pm » |
|
...al solito avendo utilizzato Ndiswrapper, hai estratto e copiato il firmware in /lib/firmware? P.S.: DI default l'installazione full della Slackware ti mette un po "di roba"  in lib/firmware ...verifica se c'è già quello che ti serve. Non solo lsmod, ma anche, perché non lo ricordo, l'output dei comandi; lspci e lspci -n Bye 
|
|
|
|
|
Registrato
|
|
|
|
|
Argos
|
 |
« Risposta #31 inserita:: Marzo 23, 2009, 07:30:07 pm » |
|
Ok: da Mandriva: [fenixkde@localhost ~]$ su Parola d'ordine: [root@localhost fenixkde]# lsmod Module Size Used by ipt_IFWLOG 3748 2 ipt_psd 44424 1 ip_set_iptree 7208 2 iptable_raw 2688 0 xt_comment 2400 0 xt_policy 4544 0 ipt_ULOG 7940 0 ipt_TTL 2720 0 ipt_ttl 2400 0 ipt_TOS 2624 0 ipt_tos 2208 0 ipt_set 2784 2 ipt_SAME 2912 0 ipt_REJECT 4320 4 ipt_REDIRECT 2752 0 ipt_recent 8280 0 ipt_owner 2496 0 ipt_NETMAP 2720 0 ipt_MASQUERADE 3936 0 ipt_LOG 6624 12 ipt_iprange 2368 0 ipt_ECN 3232 0 ipt_ecn 2688 0 ipt_CLUSTERIP 7204 0 ipt_ah 2400 0 ipt_addrtype 2368 4 nf_nat_tftp 2304 0 nf_nat_snmp_basic 9700 0 nf_nat_sip 4960 0 nf_nat_pptp 3712 0 nf_nat_proto_gre 3012 1 nf_nat_pptp nf_nat_irc 2912 0 nf_nat_h323 7040 0 nf_nat_ftp 3488 0 nf_nat_amanda 2656 0 ts_kmp 2624 5 nf_conntrack_amanda 4480 1 nf_nat_amanda nf_conntrack_tftp 4852 1 nf_nat_tftp nf_conntrack_sip 8052 1 nf_nat_sip nf_conntrack_proto_sctp 8552 0 nf_conntrack_pptp 6272 1 nf_nat_pptp nf_conntrack_proto_gre 5248 1 nf_conntrack_pptp nf_conntrack_netlink 25248 0 nf_conntrack_netbios_ns 3072 0 nf_conntrack_irc 5912 1 nf_nat_irc nf_conntrack_h323 48316 1 nf_nat_h323 nf_conntrack_ftp 7872 1 nf_nat_ftp ip_set_portmap 4832 0 ip_set_macipmap 4676 0 ip_set_ipmap 4640 0 ip_set_iphash 8068 0 ip_set 18236 11 ip_set_iptree,ipt_set,ip_set_portmap,ip_set_macipmap,ip_set_ipmap,ip_set_iphash xt_tcpmss 2752 0 xt_pkttype 2464 0 xt_physdev 3184 0 xt_NFQUEUE 2528 0 xt_NFLOG 2592 0 xt_multiport 3808 4 xt_MARK 2816 0 xt_mark 2432 0 xt_mac 2432 0 xt_limit 3008 0 xt_length 2528 0 xt_helper 2880 0 xt_hashlimit 8908 0 ip6_tables 13380 1 xt_hashlimit xt_DSCP 2848 0 xt_dscp 2624 0 xt_dccp 3652 0 xt_conntrack 3136 0 xt_CONNMARK 3264 0 xt_connmark 2752 0 xt_CLASSIFY 2400 0 xt_tcpudp 3712 35 xt_state 2816 22 iptable_nat 7236 0 nf_nat 16844 14 ipt_SAME,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_netlink,iptable_nat nf_conntrack_ipv4 14536 24 iptable_nat nf_conntrack 55840 29 ipt_MASQUERADE,ipt_CLUSTERIP,nf_nat_tftp,nf_nat_snmp_basic,nf_nat_sip,nf_nat_pptp,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_tftp,nf_conntrack_sip,nf_conntrack_proto_sctp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_netlink,nf_conntrack_netbios_ns,nf_conntrack_irc,nf_conntrack_h323,nf_conntrack_ftp,xt_helper,xt_conntrack,xt_CONNMARK,xt_connmark,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4 iptable_mangle 3008 1 nfnetlink 4280 1 nf_conntrack_netlink iptable_filter 3136 1 ip_tables 12420 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter x_tables 12068 49 ipt_IFWLOG,ipt_psd,xt_comment,xt_policy,ipt_ULOG,ipt_TTL,ipt_ttl,ipt_TOS,ipt_tos,ipt_set,ipt_SAME,ipt_REJECT,ipt_REDIRECT,ipt_recent,ipt_owner,ipt_NETMAP,ipt_MASQUERADE,ipt_LOG,ipt_iprange,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,xt_tcpmss,xt_pkttype,xt_physdev,xt_NFQUEUE,xt_NFLOG,xt_multiport,xt_MARK,xt_mark,xt_mac,xt_limit,xt_length,xt_helper,xt_hashlimit,ip6_tables,xt_DSCP,xt_dscp,xt_dccp,xt_conntrack,xt_CONNMARK,xt_connmark,xt_CLASSIFY,xt_tcpudp,xt_state,iptable_nat,ip_tables usblp 12576 0 af_packet 17156 2 snd_seq_dummy 3524 0 snd_seq_oss 29248 0 snd_seq_midi_event 6848 1 snd_seq_oss snd_seq 46096 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 7180 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 36928 0 ipv6 243972 13 nf_conntrack_h323 snd_mixer_oss 14528 1 snd_pcm_oss vboxnetflt 81896 0 kqemu 121284 0 vboxdrv 107592 1 vboxnetflt nfsd 211920 1 lockd 59816 1 nfsd nfs_acl 3776 1 nfsd auth_rpcgss 36640 1 nfsd sunrpc 160316 7 nfsd,lockd,nfs_acl,auth_rpcgss exportfs 4864 1 nfsd binfmt_misc 9352 1 loop 14276 0 fuse 41780 5 dm_mirror 20608 0 dm_mod 50948 1 dm_mirror cpufreq_ondemand 7500 1 cpufreq_conservative 7144 0 cpufreq_powersave 2304 0 p4_clockmod 5028 0 speedstep_lib 5220 1 p4_clockmod freq_table 4544 2 cpufreq_ondemand,p4_clockmod nvram 8136 0 pcmcia 32876 0 rtc_cmos 9344 0 pcspkr 3264 0 yenta_socket 23660 1 rsrc_nonstatic 11776 1 yenta_socket pcmcia_core 32692 3 pcmcia,yenta_socket,rsrc_nonstatic hsfsoar 93392 0 sis900 19840 0 ndiswrapper 181596 0 mii 5408 1 sis900 slamr 428168 0 battery 11300 0 snd_intel8x0 29628 4 ac 5028 0 thermal 13564 1 snd_intel8x0m 14444 1 snd_ac97_codec 96964 2 snd_intel8x0,snd_intel8x0m button 7024 0 ac97_bus 2592 1 snd_ac97_codec snd_pcm 66532 5 snd_pcm_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec processor 30184 2 thermal snd_timer 19844 2 snd_seq,snd_pcm snd 44260 19 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer soundcore 6592 1 snd ide_cd 35328 0 snd_page_alloc 8456 3 snd_intel8x0,snd_intel8x0m,snd_pcm i2c_sis96x 5252 0 i2c_core 19584 1 i2c_sis96x shpchp 29876 0 pci_hotplug 25920 1 shpchp sis_agp 7716 1 agpgart 27592 1 sis_agp joydev 9920 0 evdev 9568 6 led_class 4228 0 wmi_acer 7468 0 ide_generic 1824 0 [permanent] sis5513 7780 0 [permanent] ide_disk 14112 7 ide_core 98572 4 ide_cd,ide_generic,sis5513,ide_disk ext3 120968 3 jbd 40596 1 ext3 uhci_hcd 22928 0 ohci_hcd 22020 0 ehci_hcd 33004 0 usbcore 122476 6 usblp,ndiswrapper,uhci_hcd,ohci_hcd,ehci_hcd [root@localhost fenixkde]#
[fenixkde@localhost ~]$ su Parola d'ordine: [root@localhost fenixkde]# iwconfig lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11g ESSID:"accesspoint" Nickname:"localhost" Mode:Managed Frequency:2.462 GHz Access Point: 00:12:0E:33:EF:5A Bit Rate=24 Mb/s Tx-Power:25 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:23/100 Signal level:-81 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@localhost fenixkde]# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:36:15:B7:10 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:16 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:16:CE:28:C0:5A inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:ceff:fe28:c05a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4570 errors:0 dropped:0 overruns:0 frame:0 TX packets:3796 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2392291 (2.2 MiB) TX bytes:547636 (534.8 KiB) Interrupt:22 Memory:e2004000-e2006000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:42 errors:0 dropped:0 overruns:0 frame:0 TX packets:42 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5140 (5.0 KiB) TX bytes:5140 (5.0 KiB)
[root@localhost fenixkde]#
[root@localhost fenixkde]# iwlist scan lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
eth1 Scan completed : Cell 01 - Address: 00:12:0E:33:EF:5A ESSID:"accesspoint" Protocol:IEEE 802.11g Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:25/100 Signal level:-80 dBm Noise level:-96 dBm Encryption key:off Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s 11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Extra:bcn_int=100 Extra:atim=0
[root@localhost fenixkde]#
[root@localhost fenixkde]# lshw -C network *-network:0 description: Ethernet interface product: SiS900 PCI Fast Ethernet vendor: Silicon Integrated Systems [SiS] physical id: 4 bus info: pci@0000:00:04.0 logical name: eth0 version: 91 serial: 00:16:36:15:b7:10 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sis900 driverversion=v1.08.10 Apr. 2 2006 duplex=half latency=173 link=no maxlatency=11 mingnt=52 module=sis900 multicast=yes port=MII speed=10MB/s *-network:1 description: Wireless interface product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: b bus info: pci@0000:00:0b.0 logical name: eth1 version: 02 serial: 00:16:ce:28:c0:5a width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmwl5 driverversion=1.52+Broadcom,12/22/2004, 3.100. ip=192.168.1.107 latency=64 link=yes module=ndiswrapper multicast=yes wireless=IEEE 802.11g [root@localhost fenixkde]#
Continua....
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
Argos
|
 |
« Risposta #32 inserita:: Marzo 23, 2009, 07:31:03 pm » |
|
continauzione: da Slackware: root@slack:~# lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX Host (rev 11) 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25) 00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) 00:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01) 00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter root@slack:~# lspci -n 00:00.0 0600: 1039:0661 (rev 11) 00:01.0 0604: 1039:0003 00:02.0 0601: 1039:0963 (rev 25) 00:02.1 0c05: 1039:0016 00:02.5 0101: 1039:5513 00:02.6 0703: 1039:7013 (rev a0) 00:02.7 0401: 1039:7012 (rev a0) 00:03.0 0c03: 1039:7001 (rev 0f) 00:03.1 0c03: 1039:7001 (rev 0f) 00:03.3 0c03: 1039:7002 00:04.0 0200: 1039:0900 (rev 91) 00:06.0 0607: 1524:1410 (rev 01) 00:0b.0 0280: 14e4:4318 (rev 02) 01:00.0 0300: 1039:6330 root@slack:~# lsmod Module Size Used by snd_seq_dummy 6788 0 snd_seq_oss 33408 0 snd_seq_midi_event 10240 1 snd_seq_oss snd_seq 50928 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 10380 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 40480 0 snd_mixer_oss 17920 1 snd_pcm_oss ipv6 241956 12 ndiswrapper 187420 0 ppdev 11268 0 lp 13572 0 parport_pc 28196 0 parport 34796 3 ppdev,lp,parport_pc fuse 54684 5 b43 128412 0 rfkill 12184 1 b43 mac80211 158108 1 b43 cfg80211 27144 1 mac80211 input_polldev 7432 1 b43 i2c_sis96x 8324 0 snd_intel8x0 32540 2 yenta_socket 27020 1 ssb 41348 1 b43 snd_ac97_codec 101412 1 snd_intel8x0 ac97_bus 5632 1 snd_ac97_codec rsrc_nonstatic 14464 1 yenta_socket pcmcia 36524 2 b43,ssb snd_pcm 70788 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec pcmcia_core 35604 5 b43,yenta_socket,ssb,rsrc_nonstatic,pcmcia sis900 23424 0 mii 8448 1 sis900 shpchp 33172 0 sis_agp 11136 1 snd_timer 23176 3 snd_seq,snd_pcm snd 51748 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer agpgart 32584 1 sis_agp button 10128 0 soundcore 10080 1 snd snd_page_alloc 11400 2 snd_intel8x0,snd_pcm led_class 7684 1 b43 evdev 13088 5 wmi 9768 0 battery 14340 0 ac 8196 0 thermal 19484 0 psmouse 40592 0 serio_raw 9220 0 processor 36648 1 thermal thermal_sys 15144 2 thermal,processor hwmon 6300 1 thermal_sys root@slack:~#
Slackware lib/firmware: bash-3.1# ls -l total 2660 -rw-r--r-- 1 root root 137 2005-12-06 22:46 3CCFEM556.cis -rw-r--r-- 1 root root 134 2005-12-06 22:46 3CXEM556.cis -rw-r--r-- 1 root root 115 2007-04-24 01:00 BCM-LEGAL.txt -rw-r--r-- 1 root root 114688 2007-04-24 01:00 BCM2033-FW.bin -rw-r--r-- 1 root root 3245 2007-04-24 01:00 BCM2033-MD.hex -rw-r--r-- 1 root root 109 2005-12-06 22:46 COMpad2.cis -rw-r--r-- 1 root root 76 2005-12-06 22:46 COMpad4.cis -rw-r--r-- 1 root root 136 2005-12-06 22:46 DP83903.cis -rw-r--r-- 1 root root 53 2005-12-06 22:46 E-CARD.cis -rw-r--r-- 1 root root 253 2005-12-06 22:46 LA-PCM.cis -rw-r--r-- 1 root root 11880 2004-03-03 20:13 LICENSE.ipw2100-fw-1.3 -rw-r--r-- 1 root root 12007 2006-03-07 20:49 LICENSE.ipw2200-fw -rw-r--r-- 1 root root 2142 2007-09-12 17:38 LICENSE.ralink-firmware-RT61_Firm ware_V1.2.txt -rw-r--r-- 1 root root 2142 2007-09-12 17:38 LICENSE.ralink-firmware-RT71W_Fir mware_V1.8.txt -rw-r--r-- 1 root root 107 2005-12-06 22:46 MT5634ZLX.cis -rw-r--r-- 1 root root 54 2005-12-06 22:46 NE2K.cis -rw-r--r-- 1 root root 210 2005-12-06 22:46 PCMLM28.cis -rw-r--r-- 1 root root 68 2005-12-06 22:46 PE-200.cis -rw-r--r-- 1 root root 74 2005-12-06 22:46 PE520.cis -rw-r--r-- 1 root root 86 2005-12-06 22:46 RS-COM-2P.cis -rw-r--r-- 1 root root 4588 2007-04-24 01:00 STLC2500_R4_00_03.ptc -rw-r--r-- 1 root root 281 2007-04-24 01:00 STLC2500_R4_00_06.ssf -rw-r--r-- 1 root root 292 2007-04-24 01:00 STLC2500_R4_02_02_WLAN.ssf -rw-r--r-- 1 root root 508 2007-04-24 01:00 STLC2500_R4_02_04.ptc -rw-r--r-- 1 root root 10066 2008-11-21 00:02 WHENCE -rw-r--r-- 1 root root 9726 2008-11-21 05:20 atmsar11.fw drwxr-xr-x 2 root root 4096 2008-11-21 05:20 cpia2 drwxr-xr-x 2 root root 4096 2008-11-21 05:20 dabusb drwxr-xr-x 2 root root 4096 2008-11-21 05:20 dsp56k drwxr-xr-x 2 root root 4096 2008-11-21 05:20 edgeport drwxr-xr-x 2 root root 4096 2008-11-21 05:20 emi26 drwxr-xr-x 2 root root 4096 2008-11-21 05:20 emi62 drwxr-xr-x 2 root root 4096 2008-11-21 05:20 ess -rw-r--r-- 1 root root 34304 2008-11-21 05:20 intelliport2.bin -rw-r--r-- 1 root root 201138 2004-09-27 17:26 ipw2100-1.3-i.fw -rw-r--r-- 1 root root 196458 2004-09-27 17:26 ipw2100-1.3-p.fw -rw-r--r-- 1 root root 209190 2004-09-27 17:26 ipw2100-1.3.fw -rw-r--r-- 1 root root 191142 2006-03-07 20:49 ipw2200-bss.fw -rw-r--r-- 1 root root 185660 2006-03-07 20:49 ipw2200-ibss.fw -rw-r--r-- 1 root root 187836 2006-03-07 20:49 ipw2200-sniffer.fw -rw-r--r-- 1 root root 149816 2008-10-21 01:42 iwlwifi-3945-1.ucode -rw-r--r-- 1 root root 149816 2008-10-21 01:42 iwlwifi-3945-2.ucode -rw-r--r-- 1 root root 187608 2008-07-02 22:03 iwlwifi-4965-1.ucode -rw-r--r-- 1 root root 187672 2008-07-02 22:10 iwlwifi-4965-2.ucode -rw-r--r-- 1 root root 345008 2008-06-02 18:37 iwlwifi-5000-1.ucode drwxr-xr-x 2 root root 4096 2008-11-21 05:20 kaweth drwxr-xr-x 2 root root 4096 2008-11-21 05:20 keyspan drwxr-xr-x 2 root root 4096 2008-11-21 05:20 keyspan_pda drwxr-xr-x 2 root root 4096 2008-11-21 05:20 korg -rw-r--r-- 1 root root 8192 2005-10-26 21:22 rt2561.bin -rw-r--r-- 1 root root 8192 2005-10-26 21:22 rt2561s.bin -rw-r--r-- 1 root root 8192 2005-10-26 21:22 rt2661.bin -rw-r--r-- 1 root root 2048 2005-11-30 18:33 rt73.bin drwxr-xr-x 2 root root 4096 2008-11-21 05:20 sb16 -rw-r--r-- 1 root root 85 2005-12-06 22:46 tamarack.cis -rw-r--r-- 1 root root 13765 2008-11-21 05:20 ti_3410.fw -rw-r--r-- 1 root root 13764 2008-11-21 05:20 ti_5052.fw -rw-r--r-- 1 root root 7614 2008-11-21 05:20 tr_smctr.bin drwxr-xr-x 2 root root 4096 2008-11-21 05:20 ttusb-budget drwxr-xr-x 2 root root 4096 2008-11-21 05:20 vicam -rw-r--r-- 1 root root 23554 2008-11-21 05:20 whiteheat.fw -rw-r--r-- 1 root root 5626 2008-11-21 05:20 whiteheat_loader.fw drwxr-xr-x 2 root root 4096 2008-11-21 05:20 yamaha drwxr-xr-x 2 root root 4096 2008-03-12 04:47 zd1211 bash-3.1#
Grazie 
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
michele.p
|
 |
« Risposta #33 inserita:: Marzo 23, 2009, 09:37:22 pm » |
|
...in Slackware i moduli ssb e b43 sono stati caricati; estrai il firmware (come, presumo, faresti utilizzando NdisWrapper, giusto?) e copialo in /lib/firmware. Bye 
|
|
|
|
|
Registrato
|
|
|
|
|
Argos
|
 |
« Risposta #34 inserita:: Marzo 23, 2009, 10:06:26 pm » |
|
...in Slackware i moduli ssb e b43 sono stati caricati; estrai il firmware (come, presumo, faresti utilizzando NdisWrapper, giusto?) e copialo in /lib/firmware. Non ho capito molto  , il firmware sarebbe quello contenuto del driver windows per la broadcom bcmwl5.inf e .sys?  o il driver linux bcm43xx, quello da estrarre con il tool fcutter?, per che ho letto che per far funzionare ndiswrapper bisogna "pulire" il bcm43xx con modprobe -r bcm43xx  Ho bisogno di qualche tool per la estrazione, cioè, il file da estrarre il firmware è b43 giusto?, non bcm43xx  Questo?: b43-fwcutter can extract the firmware for your Broadcom 43xx hardware from different closed source drivers. The b43 driver depends on this firmware files and can't work without them.
Currently b43-fwcutter supports Apple MacOS X, Microsoft Windows 98/ME/2000/XP and Linux drivers, but keep in mind that b43-fwcutter doesn't support all driver versions.
Example: b43-fwcutter bcmwl5.sys
to cut the firmware out of bcmwl5.sys
|
|
|
|
« Ultima modifica: Marzo 23, 2009, 10:14:12 pm da Argos »
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
michele.p
|
 |
« Risposta #35 inserita:: Marzo 23, 2009, 10:29:32 pm » |
|
...al momento lascia stare i moduli che sono stati caricati e verifica se con essi funziona la tua scheda; estrai il firmware (quello che hai indicato nel tuo post) dai file inf e sys e copialo in /lib/firmware e vedi se riesci a configurare la scheda. Se dopo aver fatto un po di tentativi non funziona, allora ritornerai ad utilizzare Ndiswrapper. Ho bisogno di qualche tool per la estrazione, cioè, il file da estrarre il firmware è b43 giusto?, non bcm43xx ...non so come si chiami perché non l'ho mai utilizzato; è lo stesso che usi per/con Ndiswrapper. Bye 8-)
|
|
|
|
|
Registrato
|
|
|
|
|
Argos
|
 |
« Risposta #36 inserita:: Marzo 23, 2009, 11:08:42 pm » |
|
con Ndiswrapper uso un file chiamato bcmwl5.inf (e un file di testo) che è insieme ad un'altro con lo stesso nome ma .sys; bcmlw5.sys non sono files oggetto come wl_apsta.o, quindi quando cerco di estrarlo con b43-fwcutter mi da errore: [root@localhost 802BG]# b43-fwcutter bcmwl5.sys Sorry, the input file is either wrong or not supported by b43-fwcutter. This file has an unknown MD5sum 38ca1443660d0f5f06887c6a2e692aeb. [root@localhost 802BG]#
per che: [root@localhost 802BG]# b43-fwcutter -l b43-fwcutter version 010
Extracting firmware is possible from these binary driver files:
<driver> <filename> <microcode> <MD5 checksum>
b43legacy wl_apsta.o 295.14 e08665c5c5b66beb9c3b2dd54aa80cb3 b43 wl_apsta.o 351.126 9207bc565c2fc9fa1591f6c7911d3fc0 b43 wl_apsta_mimo.o 351.126 722e2e0d8cc04b8f118bb5afe6829ff9 b43 wl_ap.o 410.2160 1e4763b4cb8cfbaae43e5c6d3d6b2ae7 b43 wl_apsta_mimo.o 410.2160 cb8d70972b885b1f8883b943c0261a3c
[root@localhost 802BG]#
comunque, neanche il file oggetto posso estrarre  , creo che non ho capito bene come si fà, se vedi il mio primo post, te ne accorgerai che è passato un anno e non sono ancora riuscito  . Non è che devo prendere i files .inf e .sys e copiarli in /lib/firmware/ 
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
michele.p
|
 |
« Risposta #37 inserita:: Marzo 24, 2009, 11:46:11 am » |
|
...ma anche con Mandriva utilizzi Ndiswrapper?..se si, segui la stessa strada che hai percorso con Mandriva.  Bye 
|
|
|
|
|
Registrato
|
|
|
|
|
Argos
|
 |
« Risposta #38 inserita:: Marzo 24, 2009, 12:23:38 pm » |
|
Ecco  , e siamo arrivati al punto: Con mandriva Ndiswrapper funziona (esiste già sin dall'installazione) Con Slackware e tutte le altre, non funziona (anche se installandolo, make, make install) 
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
michele.p
|
 |
« Risposta #39 inserita:: Marzo 24, 2009, 02:53:58 pm » |
|
...se ti occorre Ndiswrapper per Slackware puoi scaricarlo da qui e installarlo (oppure utilizzare, ad esempio, il package manager Swaret per installarlo direttamente via web...se ti serve il file di configurazione di Swaret dimmelo che lo riporto). Bye 
|
|
|
|
|
Registrato
|
|
|
|
|
Argos
|
 |
« Risposta #40 inserita:: Marzo 24, 2009, 10:11:56 pm » |
|
Grazie michele.p  . Ho eliminato b43 (modprobe -r b43) lasciando ndiswrapper installato dal file.tar.gz, i files necessari sono già in /lib/firmware. Adesso, visto che dopo la rimozione di b43 mi ha riconosciuto la periferica wireless, mi sono imbattuto nella configurazione con iwconfig  , totalmente nuova per me  ; il fatto è che adesso si accende il led della scheda, come se fosse collegato, ma quando avvio firefox non posso navigare, cioè come se fosse scollegato, ma il led è acceso  . un dato curioso: in mandriva viene vista come eth1, invece in Slackware come wlan0, (appena posso ti posto gl'outputs di iwconfig di tutte e due). a dopo e grazie 
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
|
|
Argos
|
 |
« Risposta #42 inserita:: Marzo 25, 2009, 10:25:06 am » |
|
Grazie michele.p, sempre disponibile  . Sarebbe molto utile usarlo  , ho scaricato i pacchetti swaret da te linkati con mandriva  , il problema è che, se non ho già il wireless funzionante non posso usarlo, o si può usare anche quando no si è connessi?, tipo: "l'atp-get install"?  , se avessi la connessione via cavo mi sarei risparmiato tutti questi guai  , il fatto di dipendere dal wireless ha fatto si che io mi perdesse di provare ad installare tante distro  , sai, quello che si fa per curiosità e di conseguenza, per sapere. Comunque, ho installato KWLAN, dopo la sua installazione, il led a smesso di atteggiarsi come una webcam  , ed è cominciato a comportarsi come se cercasse delle reti da cui collegarsi, ma; quando do il comando iwconfig compare, tra le altre cose, che l'ssid è off/Any, poi con: iwconfig wlan0 essid "accesspoint"; il led rimane di nuovo acceso, l'ssid e "accesspoint" appunto, come se si fosse collegato ma niente, non si naviga  . Poi, un'altra cosa  , in Slackware, quando do il comando iwconfig, nella stringa: eth1 IEEE 802.11g ESSID:"accesspoint" , manca: Nickname:"localhost", il nicname, cosa sarebbe? il nome del computer giusto?, ma con il comando: wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d, non si dovrebbero associare router e computer?  . Il file ndiswrapper linkato da i repository Slackware (il file.tar.gz o gz2 non ricoro  ) è identico a quello che ho installato senza usare swaret, e sembra funzionare, per che al boot la scheda wireless viene riconosciuta nel dmesg e fa un lanpeggetto  , pensi che sia ancora necessario reinstallare ndiswrapper? o il mio è un problema di configurazione della connessione?  , devo usare indirizzi IP statichi?.  . Sto seguendo questa discussione che ho trovato in giro  , è importante sapere che ne pensi: http://forum.ubuntu-it.org/index.php/topic,201647.0.htmlA dopo 
|
|
|
|
« Ultima modifica: Marzo 25, 2009, 10:31:12 am da Argos »
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
Argos
|
 |
« Risposta #43 inserita:: Marzo 25, 2009, 11:27:54 am » |
|
il mio wpa_supplicant.conf: # See /usr/doc/wpa_supplicant-0.5.10/wpa_supplicant.conf.sample # for many more options that you can use in this file.
# This line enables the use of wpa_cli which is used by rc.wireless # if possible (to check for successful association) ctrl_interface=/var/run/wpa_supplicant # By default, only root (group 0) may use wpa_cli ctrl_interface_group=0 eapol_version=1 ap_scan=1 fast_reauth=1
# WPA protected network, supply your own ESSID and WPAPSK here: network={ scan_ssid="accesspoint" ssid="accesspoint" proto=RSN WPA key_mgmt=WPA-EAP pairwise=CCMP TKIP group=CCMP TKIP WEP104 WEP40 # psk='your_psk_here' }
# Plaintext connection (no WPA, no IEEE 802.1X), # nice for hotel/airport types of WiFi network. network={ key_mgmt=NONE priority=0 }
Ho comentato la riga "psk" se no mi dava errore nell'output : wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -dAdesso coice del lo stesso output riuscito, che ad un certo punto si ferma (normale): root@slack:~# wpa_supplicant -iwlan0 -c/etc/wpa_supplicant.conf -d Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' ctrl_interface_group='0' (DEPRECATED) eapol_version=1 ap_scan=1 fast_reauth=1 Priority group 0 id=0 ssid='accesspoint' id=1 ssid='' Initializing interface (2) 'wlan0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:16:ce:28:c0:5a wpa_driver_wext_set_wpa wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_countermeasures wpa_driver_wext_set_drop_unencrypted Setting scan request: 0 sec 100000 usec Using existing control interface directory. ctrl_interface_group=0 Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:00:00:00:00:00 Added BSSID 00:00:00:00:00:00 into blacklist CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 State: DISCONNECTED -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received 228 bytes of scan results (1 BSSes) Scan results: 1 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:12:0e:33:ef:5a ssid='accesspoint' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - no WPA/RSN IE Try to find non-WPA AP 0: 00:12:0e:33:ef:5a ssid='accesspoint' wpa_ie_len=0 rsn_ie_len=0 caps=0x1 skip - non-WPA network not allowed selected non-WPA AP 00:12:0e:33:ef:5a ssid='accesspoint' Trying to associate with 00:12:0e:33:ef:5a (SSID='accesspoint' freq=2462 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: clearing AP WPA IE WPA: clearing AP RSN IE WPA: clearing own WPA/RSN IE No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - portControl=ForceAuthorized RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b04 len=12 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8c07 len=53 AssocReq IE wireless event - hexdump(len=45): 00 0b 61 63 63 65 73 73 70 6f 69 6 e 74 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 00 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8c08 len=24 AssocResp IE wireless event - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b15 len=20 Wireless event: new AP: 00:12:0e:33:ef:5a Association info event req_ies - hexdump(len=45): 00 0b 61 63 63 65 73 73 70 6f 69 6e 74 01 08 82 84 8b 96 24 30 48 6c 32 04 0c 12 18 60 dd 06 00 40 96 01 01 00 dd 06 00 10 18 02 00 0 0 resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c WPA: clearing own WPA/RSN IE State: ASSOCIATING -> ASSOCIATED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 Associated to a new BSS: BSSID=00:12:0e:33:ef:5a Associated with 00:12:0e:33:ef:5a WPA: Association event - clear replay counter EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state S_FORCE_AUTH EAPOL: SUPP_BE entering state IDLE Cancelling authentication timeout State: ASSOCIATED -> COMPLETED CTRL-EVENT-CONNECTED - Connection to 00:12:0e:33:ef:5a completed (auth) [id=1 id _str=] wpa_driver_wext_set_operstate: operstate 0->1 (UP) WEXT: Operstate: linkmode=-1, operstate=6 Cancelling scan request RTM_NEWLINK: operstate=1 ifi_flags=0x11003 ([UP][LOWER_UP]) WEXT: Operstate: linkmode=-1, operstate=6 RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=1 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Continua....
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|
Argos
|
 |
« Risposta #44 inserita:: Marzo 25, 2009, 11:29:39 am » |
|
continuazione: L'ifconfig: root@slack:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:36:15:b7:10 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x2000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:218 errors:0 dropped:0 overruns:0 frame:0 TX packets:218 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18824 (18.3 KiB) TX bytes:18824 (18.3 KiB)
wlan0 Link encap:Ethernet HWaddr 00:16:ce:28:c0:5a inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::216:ceff:fe28:c05a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:141 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15588 (15.2 KiB) TX bytes:2496 (2.4 KiB) Interrupt:17 Memory:e2004000-e2006000
root@slack:~#
Che dici? dove sbaglio? 
|
|
|
|
|
Registrato
|
"Ciò che non mi uccide, mi fortifica."
Friedrich Wilhelm Nietzsche.
|
|
|
|