ubuntu 10.04 non monta hd esterni usb

[ask0]

Salve a tutti. Ho installato 10.04 sul mio notebook DELL Latitude E5510 ma presto ho rilevato un problema, gravissimo.
Il sistema non monta piu' hd usb, ne' chiavette, ne' dischi. Ho provato a seguire le istruzioni di diversi forum ma sono sempre allo stesso punto. Mi pare che la 10.04 abbia qualche bug, mi domando quando verra' rilasciata una patch e se la 10.10 e' uscita anche per questo problema. Nessuno mi da una mano? Ecco l'output del comando lsusb, dopo aver inserito una chiavetta da 1 gb.
---
alex@alex-laptop:~$ lsusb
Bus 002 Device 005: ID 0930:653d Toshiba Corp. Kingston DataTraveler 2.0 Stick (1GB)
Bus 002 Device 004: ID 0458:003a KYE Systems Corp. (Mouse Systems)
Bus 002 Device 003: ID 413c:8187 Dell Computer Corp.
Bus 002 Device 002: ID 8087:0020
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0c45:6413 Microdia
Bus 001 Device 002: ID 8087:0020
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
---
Ossia, ok, il notebook vede il Kingston DataTraveler
Adesso provo a montarlo. Creo la directory
---
alex@alex-laptop:~$ sudo mkdir /media/kingston
mkdir: impossibile creare la directory "/media/kingston": Il file esiste
---
vabbe', l'avevo gia' creata
alex@alex-laptop:~$ sudo mount /dev/sdb1 /media/kingston
mount: il device speciale /dev/sdb1 non esiste
alex@alex-laptop:~$

posting.php?mode=edit&f=6&p=77281#

O qualcuno mi dice qualcosa oppure mi sparo (si fa per dire) - in alternativa razzo tutto - forse ottengo qualcosa???.
IL FATTO E' CHE NON POSSO NEMMENO TORNARE ALLA 9.10 CHE IN QUESTO PC NON VA!!! 
HEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

[Ema90]

Ciao , subito dopo aver attaccato la chiavetta posta l'output del comando dmesg e del comando lsmod

[ask0]

Provo a mandarti l'output di dmesg in due parti

[    0.647173] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.648348] VFS: Disk quotas dquot_6.5.2
[    0.648393] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.648848] fuse init (API version 7.13)
[    0.648917] msgmni has been set to 1667
[    0.649128] alg: No test for stdrng (krng)
[    0.649179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.649182] io scheduler noop registered
[    0.649184] io scheduler anticipatory registered
[    0.649185] io scheduler deadline registered
[    0.649217] io scheduler cfq registered (default)
[    0.649370]   alloc irq_desc for 29 on node -1
[    0.649372]   alloc kstat_irqs on node -1
[    0.649384] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
[    0.649396] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.649532]   alloc irq_desc for 30 on node -1
[    0.649533]   alloc kstat_irqs on node -1
[    0.649541] pcieport 0000:00:1c.1: irq 30 for MSI/MSI-X
[    0.649551] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.649683]   alloc irq_desc for 31 on node -1
[    0.649684]   alloc kstat_irqs on node -1
[    0.649694] pcieport 0000:00:1c.2: irq 31 for MSI/MSI-X
[    0.649704] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.649834]   alloc irq_desc for 32 on node -1
[    0.649836]   alloc kstat_irqs on node -1
[    0.649844] pcieport 0000:00:1c.3: irq 32 for MSI/MSI-X
[    0.649854] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.649984]   alloc irq_desc for 33 on node -1
[    0.649985]   alloc kstat_irqs on node -1
[    0.649993] pcieport 0000:00:1c.5: irq 33 for MSI/MSI-X
[    0.650004] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.650085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.650220] _OSC invalid UUID
[    0.650320] _OSC invalid UUID
[    0.650417] _OSC invalid UUID
[    0.650513] _OSC invalid UUID
[    0.650609] _OSC invalid UUID
[    0.650716] _OSC invalid UUID
[    0.650811] _OSC invalid UUID
[    0.650915] _OSC invalid UUID
[    0.651015] _OSC invalid UUID
[    0.651112] _OSC invalid UUID
[    0.651131] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.653412] ACPI: AC Adapter [AC] (on-line)
[    0.653480] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.655399] ACPI: Lid Switch [liD]
[    0.655435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.655440] ACPI: Power Button [PBTN]
[    0.655473] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.655476] ACPI: Sleep Button [SBTN]
[    0.655504] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.655506] ACPI: Power Button [PWRF]
[    0.656576] ACPI: SSDT b77ea918 003F0 (v01  PmRef  Cpu0Ist 00003000 INTL 20080729)
[    0.657209] ACPI: SSDT b77e8018 00842 (v01  PmRef  Cpu0Cst 00003001 INTL 20080729)
[    0.657796] Monitor-Mwait will be used to enter C-1 state
[    0.657824] Monitor-Mwait will be used to enter C-2 state
[    0.657845] Monitor-Mwait will be used to enter C-3 state
[    0.657883] processor LNXCPU:00: registered as cooling_device0
[    0.658397] ACPI: SSDT b77e9a98 00303 (v01  PmRef    ApIst 00003000 INTL 20080729)
[    0.658854] ACPI: SSDT b77e7d98 00119 (v01  PmRef    ApCst 00003000 INTL 20080729)
[    0.667117] processor LNXCPU:01: registered as cooling_device1
[    0.668073] processor LNXCPU:02: registered as cooling_device2
[    0.669104] processor LNXCPU:03: registered as cooling_device3
[    0.677135] isapnp: Scanning for PnP cards...
[    0.679280] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.679420] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.679801] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.680615] brd: module loaded
[    0.680995] loop: module loaded
[    0.681056] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.681353] Fixed MDIO Bus: probed
[    0.681377] PPP generic driver version 2.4.2
[    0.681401] tun: Universal TUN/TAP device driver, 1.6
[    0.681402] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.681465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.681487] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.681501] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.681505] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.681529] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.681557] ehci_hcd 0000:00:1a.0: debug port 2
[    0.685438] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
[    0.685458] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd7d50000
[    0.698819] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.698901] usb usb1: configuration #1 chosen from 1 choice
[    0.698924] hub 1-0:1.0: USB hub found
[    0.698930] hub 1-0:1.0: 2 ports detected
[    0.698976] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.698991] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.698994] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.699025] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.699048] ehci_hcd 0000:00:1d.0: debug port 2
[    0.702948] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
[    0.702966] ehci_hcd 0000:00:1d.0: irq 17, io mem 0xd7d30000
[    0.718782] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.718860] usb usb2: configuration #1 chosen from 1 choice
[    0.718879] hub 2-0:1.0: USB hub found
[    0.718885] hub 2-0:1.0: 2 ports detected
[    0.718930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.718943] uhci_hcd: USB Universal Host Controller Interface driver
[    0.719018] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.719238] i8042.c: Warning: Keylock active.
[    0.720501] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.720508] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.720578] mice: PS/2 mouse device common for all mice
[    0.720682] rtc_cmos 00:06: RTC can wake from S4
[    0.720712] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.720742] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.720819] device-mapper: uevent: version 1.0.3
[    0.720920] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.721004] device-mapper: multipath: version 1.1.0 loaded
[    0.721007] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.721090] EISA: Probing bus 0 at eisa.0
[    0.721096] Cannot allocate resource for EISA slot 1
[    0.721098] Cannot allocate resource for EISA slot 2
[    0.721099] Cannot allocate resource for EISA slot 3
[    0.721101] Cannot allocate resource for EISA slot 4
[    0.721102] Cannot allocate resource for EISA slot 5
[    0.721104] Cannot allocate resource for EISA slot 6
[    0.721105] Cannot allocate resource for EISA slot 7
[    0.721107] Cannot allocate resource for EISA slot 8
[    0.721108] EISA: Detected 0 cards.
[    0.721240] Freeing initrd memory: 7781k freed
[    0.721353] cpuidle: using governor ladder
[    0.721598] cpuidle: using governor menu
[    0.722097] TCP cubic registered
[    0.722321] NET: Registered protocol family 10
[    0.722860] lo: Disabled Privacy Extensions
[    0.723199] NET: Registered protocol family 17
[    0.724041] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.725138] Using IPI No-Shortcut mode
[    0.725212] PM: Resume from disk failed.
[    0.725224] registered taskstats version 1
[    0.725881]   Magic number: 2:157:773
[    0.725887] hub 2-0:1.0: hash matches
[    0.725981] rtc_cmos 00:06: setting system clock to 2010-11-02 07:45:17 UTC (1288683917)
[    0.725985] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.725986] EDD information not available.
[    0.782859] ACPI: Battery Slot [BAT0] (battery present)
[    1.038249] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.045687] isapnp: No Plug & Play device found
[    1.045703] Freeing unused kernel memory: 656k freed
[    1.045966] Write protecting the kernel text: 4684k
[    1.046002] Write protecting the kernel read-only data: 1840k
[    1.060280] udev: starting version 151
[    1.131131] tg3.c:v3.102 (September 1, 2009)
[    1.131356] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.131371] tg3 0000:0b:00.0: setting latency timer to 64
[    1.135436] ahci 0000:00:1f.2: version 3.0
[    1.135452] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.135492]   alloc irq_desc for 34 on node -1
[    1.135495]   alloc kstat_irqs on node -1
[    1.135508] ahci 0000:00:1f.2: irq 34 for MSI/MSI-X
[    1.135597] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[    1.135601] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[    1.135607] ahci 0000:00:1f.2: setting latency timer to 64
[    1.139124] ohci1394 0000:03:00.4: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[    1.139133] ohci1394 0000:03:00.4: setting latency timer to 64
[    1.149562] eth0: Tigon3 [partno(BCM95761e) rev 5761100] (PCI Express) MAC address f0:4d:a2:90:34:cc
[    1.149567] eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    1.149570] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    1.149572] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    1.150110] scsi0 : ahci
[    1.150235] scsi1 : ahci
[    1.150300] scsi2 : ahci
[    1.150362] scsi3 : ahci
[    1.150420] scsi4 : ahci
[    1.150483] scsi5 : ahci
[    1.151564] ata1: SATA max UDMA/133 abar m2048@0xd7d20000 port 0xd7d20100 irq 34
[    1.151569] ata2: SATA max UDMA/133 abar m2048@0xd7d20000 port 0xd7d20180 irq 34
[    1.151571] ata3: DUMMY
[    1.151573] ata4: DUMMY
[    1.151574] ata5: DUMMY
[    1.151578] ata6: SATA max UDMA/133 abar m2048@0xd7d20000 port 0xd7d20380 irq 34
[    1.175579] usb 1-1: configuration #1 chosen from 1 choice
[    1.175918] hub 1-1:1.0: USB hub found
[    1.176028] hub 1-1:1.0: 6 ports detected
[    1.196506] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[d2c00000-d2c007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    1.286266] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.418703] usb 2-1: configuration #1 chosen from 1 choice
[    1.418864] hub 2-1:1.0: USB hub found
[    1.419076] hub 2-1:1.0: 8 ports detected
[    1.470000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.470005] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.470038] ata6: SATA link down (SStatus 0 SControl 300)
[    1.471583] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.472414] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A5SH, XD12, max UDMA/100
[    1.473801] ata2.00: configured for UDMA/100
[    1.490389] usb 1-1.4: new high speed USB device using ehci_hcd and address 3
[    1.513078] ata1.00: ATA-8: ST9320423AS, D005SDM1, max UDMA/133
[    1.513082] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.515497] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.515896] ata1.00: configured for UDMA/133
[    1.530094] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      D005 PQ: 0 ANSI: 5
[    1.530217] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.530235] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.530319] sd 0:0:0:0: [sda] Write Protect is off
[    1.530322] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.530338] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.530450]  sda:
[    1.534193] scsi 1:0:0:0: CD-ROM            PLDS     DVD+-RW DS-8A5SH XD12 PQ: 0 ANSI: 5
[    1.536837]  sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray

[ask0]

seconda parte...
[    1.543719] Uniform CD-ROM driver Revision: 3.20
[    1.543827] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.543869] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.553210]  sda5 sda6 sda7 sda8 >
[    1.580675] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.686321] usb 1-1.4: configuration #1 chosen from 1 choice
[    1.765811] usb 2-1.2: new low speed USB device using ehci_hcd and address 3
[    1.861454] usb 2-1.2: configuration #1 chosen from 1 choice
[    1.871947] usbcore: registered new interface driver hiddev
[    1.874247] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input6
[    1.874388] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.2/input0
[    1.874404] usbcore: registered new interface driver usbhid
[    1.874466] usbhid: v2.6:USB HID core driver
[    1.937751] usb 2-1.6: new full speed USB device using ehci_hcd and address 4
[    2.033624] usb 2-1.6: configuration #1 chosen from 1 choice
[    2.317746] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    2.472806] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[07099e81434fc000]
[   11.412311] udev: starting version 151
[   11.415582] Adding 3074040k swap on /dev/sda5.  Priority:-1 extents:1 across:3074040k
[   11.427444] lp: driver loaded but no devices found
[   11.439254] Initializing USB Mass Storage driver...
[   11.439343] usbcore: registered new interface driver usb-storage
[   11.439349] USB Mass Storage support registered.
[   11.587477] Linux agpgart interface v0.103
[   11.635104] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   11.663901] agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
[   11.664745] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[   11.712346] udev: renamed network interface eth0 to eth1
[   11.975782] parport_pc 00:09: activated
[   11.975789] parport_pc 00:09: reported by Plug and Play ACPI
[   11.976022] parport_pc 00:09: disabled
[   11.980942] [drm] Initialized drm 1.1.0 20060810
[   11.998518] type=1505 audit(1288673128.793:2):  operation="profile_load" pid=2609 name="/sbin/dhclient3"
[   11.999155] type=1505 audit(1288673128.793:3):  operation="profile_load" pid=2609 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   11.999465] type=1505 audit(1288673128.793:4):  operation="profile_load" pid=2609 name="/usr/lib/connman/scripts/dhclient-script"
[   12.043163] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[   12.043167] PM: Marking nosave pages: 000000000009a000 - 0000000000100000
[   12.043170] PM: Basic memory bitmaps created
[   12.061178] PM: Basic memory bitmaps freed
[   12.064001] sdhci: Secure Digital Host Controller Interface driver
[   12.064004] sdhci: Copyright(c) Pierre Ossman
[   12.068506] input: Dell WMI hotkeys as /devices/virtual/input/input7
[   12.068670] cfg80211: Calling CRDA to update world regulatory domain
[   12.135481] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 3)
[   12.135510] sdhci-pci 0000:03:00.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   12.135546] mmc0: Unknown controller version (2). You may experience problems.
[   12.135558] sdhci-pci 0000:03:00.0: setting latency timer to 64
[   12.135667] Registered led device: mmc0::
[   12.135755] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
[   12.272626] psmouse serio1: ID: 73 02 64
[   12.345940] cfg80211: World regulatory domain updated:
[   12.345943]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   12.345947]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.345950]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.345953]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   12.345956]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.345958]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   12.970175] ppdev: user-space parallel port driver
[   12.972200] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   13.113027] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[   13.113032] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[   13.113104] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.113115] iwlagn 0000:02:00.0: setting latency timer to 64
[   13.113150] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 6000 Series 3x3 AGN REV=0x74
[   13.131737] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.131754] i915 0000:00:02.0: setting latency timer to 64
[   13.141661] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[   13.141681] Bluetooth: Core ver 2.15
[   13.141726]   alloc irq_desc for 35 on node -1
[   13.141729]   alloc kstat_irqs on node -1
[   13.141750] iwlagn 0000:02:00.0: irq 35 for MSI/MSI-X
[   13.141879] NET: Registered protocol family 31
[   13.141881] Bluetooth: HCI device and connection manager initialized
[   13.141884] Bluetooth: HCI socket layer initialized
[   13.144958] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.145083] usbcore: registered new interface driver btusb
[   13.600992]   alloc irq_desc for 36 on node -1
[   13.600996]   alloc kstat_irqs on node -1
[   13.601006] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[   13.601013] [drm] set up 31M of stolen space
[   13.606068] Linux video capture interface: v2.00
[   13.611469] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:6413)
[   13.621369] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
[   13.621443] usbcore: registered new interface driver uvcvideo
[   13.621447] USB Video Class driver (v0.1.0)
[   13.624752] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   13.637126] udev: renamed network interface wlan0 to wlan1
[   13.987382] fb0: inteldrmfb frame buffer device
[   13.987385] registered panic notifier
[   15.095255] acpi device:39: registered as cooling_device4
[   15.096319] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   15.096447] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   15.096523] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.096576]   alloc irq_desc for 22 on node -1
[   15.096579]   alloc kstat_irqs on node -1
[   15.096588] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.096635] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   15.100202] vga16fb: initializing
[   15.100205] vga16fb: mapped to 0xc00a0000
[   15.100209] vga16fb: not registering due to another framebuffer present
[   15.132164] dell-wmi: Unknown key ffd0 pressed
[   15.210796] Console: switching to colour frame buffer device 200x56
[   15.213191] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   15.420481] EXT4-fs (sda7): mounted filesystem with ordered data mode
[   15.715341] EXT4-fs (sda8): mounted filesystem with ordered data mode
[   15.796400] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input11
[   15.801966] dell-wmi: Unknown key ffd1 pressed
[   16.230300] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00bf0900
[   16.230788] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   16.230894] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   16.230973] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   16.231052] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   18.238027] type=1505 audit(1288673135.041:5):  operation="profile_load" pid=6289 name="/usr/share/gdm/guest-session/Xsession"
[   18.239223] type=1505 audit(1288673135.045:6):  operation="profile_replace" pid=6290 name="/sbin/dhclient3"
[   18.239739] type=1505 audit(1288673135.045:7):  operation="profile_replace" pid=6290 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.239994] type=1505 audit(1288673135.045::  operation="profile_replace" pid=6290 name="/usr/lib/connman/scripts/dhclient-script"
[   18.242238] type=1505 audit(1288673135.045:9):  operation="profile_load" pid=6291 name="/usr/bin/evince"
[   18.249337] type=1505 audit(1288673135.053:10):  operation="profile_load" pid=6291 name="/usr/bin/evince-previewer"
[   18.253129] type=1505 audit(1288673135.057:11):  operation="profile_load" pid=6291 name="/usr/bin/evince-thumbnailer"
[   18.258376] type=1505 audit(1288673135.061:12):  operation="profile_load" pid=6296 name="/usr/bin/freshclam"
[   18.259728] type=1505 audit(1288673135.065:13):  operation="profile_load" pid=6297 name="/usr/lib/cups/backend/cups-pdf"
[   18.260287] type=1505 audit(1288673135.065:14):  operation="profile_load" pid=6297 name="/usr/sbin/cupsd"
[   18.306607]   alloc irq_desc for 37 on node -1
[   18.306611]   alloc kstat_irqs on node -1
[   18.306635] tg3 0000:0b:00.0: irq 37 for MSI/MSI-X
[   18.422685] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   19.780997] Bluetooth: L2CAP ver 2.14
[   19.781000] Bluetooth: L2CAP socket layer initialized
[   19.788435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.788439] Bluetooth: BNEP filters: protocol multicast
[   19.801576] Bridge firewalling registered
[   19.814237] Bluetooth: SCO (Voice Link) ver 0.6
[   19.814241] Bluetooth: SCO socket layer initialized
[   19.895976] Bluetooth: RFCOMM TTY layer initialized
[   19.895983] Bluetooth: RFCOMM socket layer initialized
[   19.895986] Bluetooth: RFCOMM ver 1.11
[   20.069534] tg3: eth1: Link is up at 100 Mbps, full duplex.
[   20.069538] tg3: eth1: Flow control is on for TX and on for RX.
[   20.069709] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.053472] CPU0 attaching NULL sched-domain.
[   21.053478] CPU1 attaching NULL sched-domain.
[   21.053480] CPU2 attaching NULL sched-domain.
[   21.053482] CPU3 attaching NULL sched-domain.
[   21.086115] CPU0 attaching sched-domain:
[   21.086120]  domain 0: span 0,2 level SIBLING
[   21.086122]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[   21.086127]   domain 1: span 0-3 level MC
[   21.086129]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   21.086136] CPU1 attaching sched-domain:
[   21.086138]  domain 0: span 1,3 level SIBLING
[   21.086139]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[   21.086143]   domain 1: span 0-3 level MC
[   21.086145]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   21.086150] CPU2 attaching sched-domain:
[   21.086151]  domain 0: span 0,2 level SIBLING
[   21.086153]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[   21.086157]   domain 1: span 0-3 level MC
[   21.086159]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   21.086163] CPU3 attaching sched-domain:
[   21.086165]  domain 0: span 1,3 level SIBLING
[   21.086167]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[   21.086170]   domain 1: span 0-3 level MC
[   21.086172]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   21.086644] CPU0 attaching NULL sched-domain.
[   21.086648] CPU1 attaching NULL sched-domain.
[   21.086650] CPU2 attaching NULL sched-domain.
[   21.086653] CPU3 attaching NULL sched-domain.
[   21.124247] CPU0 attaching sched-domain:
[   21.124252]  domain 0: span 0,2 level SIBLING
[   21.124254]   groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[   21.124259]   domain 1: span 0-3 level MC
[   21.124261]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   21.124268] CPU1 attaching sched-domain:
[   21.124269]  domain 0: span 1,3 level SIBLING
[   21.124271]   groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[   21.124275]   domain 1: span 0-3 level MC
[   21.124277]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   21.124282] CPU2 attaching sched-domain:
[   21.124283]  domain 0: span 0,2 level SIBLING
[   21.124285]   groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[   21.124289]   domain 1: span 0-3 level MC
[   21.124290]    groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[   21.124295] CPU3 attaching sched-domain:
[   21.124296]  domain 0: span 1,3 level SIBLING
[   21.124298]   groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[   21.124302]   domain 1: span 0-3 level MC
[   21.124304]    groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[   30.833673] eth1: no IPv6 routers present
[   36.158196] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 4551.688360] dell-wmi: Unknown key ffd0 pressed
[ 5334.030917] dell-wmi: Unknown key ffd1 pressed
[ 9084.220306] dell-wmi: Unknown key ffd0 pressed
[15289.399559] dell-wmi: Unknown key ffd1 pressed
[15401.680287] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[15600.516438] usb 2-1.4: new high speed USB device using ehci_hcd and address 5
[15600.610638] usb 2-1.4: configuration #1 chosen from 1 choice
[15600.664731] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2C17
[15600.664772] usbcore: registered new interface driver usblp
[15601.692351] usb 2-1.4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[15704.172367] usblp0: removed
[19070.551243] dell-wmi: Unknown key ffd0 pressed
[19183.691239] dell-wmi: Unknown key ffd1 pressed
[19899.878729] tg3: eth1: Link is down.
[19963.544975] tg3: eth1: Link is up at 100 Mbps, full duplex.
[19963.544981] tg3: eth1: Flow control is on for TX and on for RX.
[21775.006707] tg3: eth1: Link is down.
[21776.584086] tg3: eth1: Link is up at 100 Mbps, full duplex.
[21776.584092] tg3: eth1: Flow control is on for TX and on for RX.
[31051.920108] usb 2-1.1: new full speed USB device using ehci_hcd and address 6
[31052.038712] usb 2-1.1: configuration #1 chosen from 1 choice
[31052.062835] yealink: invalid payload size 8, expected 16
[31052.062949] input: Yealink usb-p1k as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.3/input/input16
[31052.066235] usbcore: registered new interface driver yealink
[31052.066279] yealink: yld-20051230:Yealink phone driver
[31052.066681] yealink: urb_ctl_callback - urb status -32
[31052.067303] yealink: urb_ctl_callback - urb status -32
[31052.067931] yealink: urb_ctl_callback - urb status -32
[31052.068576] yealink: urb_ctl_callback - urb status -32
[31052.069178] yealink: urb_ctl_callback - urb status -32
[31052.072462] yealink: urb_ctl_callback - urb status -32
[31052.077786] yealink: urb_ctl_callback - urb status -32
[31052.078789] yealink: urb_ctl_callback - urb status -32
[31052.105483] usbcore: registered new interface driver snd-usb-audio
[38718.712454] dell-wmi: Unknown key ffd0 pressed
[38979.150847] dell-wmi: Unknown key ffd1 pressed
[45086.925625] tg3: eth1: Link is down.
[45088.506687] tg3: eth1: Link is up at 100 Mbps, full duplex.
[45088.506693] tg3: eth1: Flow control is on for TX and on for RX.
[46300.949442] usb 2-1.3: new high speed USB device using ehci_hcd and address 7
[46301.052484] usb 2-1.3: configuration #1 chosen from 1 choice
[46301.053229] scsi6 : SCSI emulation for USB Mass Storage devices
[46301.053337] usb-storage: device found at 7
[46301.053341] usb-storage: waiting for device to settle before scanning
[46781.900226] usb 2-1.3: USB disconnect, address 7
[46782.887887] tg3: eth1: Link is down.
[46784.474997] tg3: eth1: Link is up at 100 Mbps, full duplex.
[46784.475003] tg3: eth1: Flow control is on for TX and on for RX.
[46797.685410] usb 2-1.3: new high speed USB device using ehci_hcd and address 8
[46797.788042] usb 2-1.3: configuration #1 chosen from 1 choice
[46797.788761] scsi7 : SCSI emulation for USB Mass Storage devices
[46797.788866] usb-storage: device found at 8
[46797.788870] usb-storage: waiting for device to settle before scanning
alex@alex-laptop:~$

[ask0]

alex@alex-laptop:~$ lsmod
Module                  Size  Used by
snd_usb_audio          75765  3
yealink                 8506  0
snd_usb_lib            15801  1 snd_usb_audio
usblp                  10481  0
hidp                   11083  0
binfmt_misc             6587  1
rfcomm                 33421  8
sco                     7885  2
bridge                 45582  0
stp                     1655  1 bridge
bnep                    9436  2
l2cap                  30624  17 hidp,rfcomm,bnep
snd_hda_codec_intelhdmi    11622  1
snd_hda_codec_idt      51978  1
fbcon                  35102  127
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_hda_intel          22037  2
snd_hda_codec          74201  3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep               5412  2 snd_usb_audio,snd_hda_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70694  5 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26722  0
snd_seq_midi            4557  0
arc4                    1153  2
snd_rawmidi            19056  2 snd_usb_lib,snd_seq_midi
uvcvideo               57054  0
videodev               34361  1 uvcvideo
v4l1_compat            13251  2 uvcvideo,videodev
btusb                  10957  2
bluetooth              49892  10 hidp,rfcomm,sco,bnep,l2cap,btusb
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
i915                  286079  2
iwlagn                106815  0
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
iwlcore               106050  1 iwlagn
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev                   5259  0
mac80211              205402  2 iwlagn,iwlcore
sdhci_pci               5470  0
drm_kms_helper         29297  1 i915
snd                    54180  23 snd_usb_audio,snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
dell_wmi                1793  0
psmouse                63245  0
sdhci                  15462  1 sdhci_pci
serio_raw               3978  0
led_class               2864  2 iwlcore,sdhci
cfg80211              126528  3 iwlagn,iwlcore,mac80211
parport_pc             25962  0
drm                   162409  3 i915,drm_kms_helper
dcdbas                  5422  0
i2c_algo_bit            5028  1 i915
intel_agp              24119  2 i915
soundcore               6620  1 snd
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
agpgart                31724  2 drm,intel_agp
video                  17375  1 i915
output                  1871  1 video
usb_storage            39553  0
lp                      7060  0
parport                32635  3 ppdev,parport_pc,lp
usbhid                 36110  0
hid                    67032  2 hidp,usbhid
ohci1394               26950  0
ahci                   32200  5
tg3                   109324  0
ieee1394               81181  1 ohci1394
alex@alex-laptop:~$

Ecco qua; io ci capisco niente

[Argos]

ciao ragazzi 

...sembra che ti vede la chiavetta, mentre è inserita postaci anche l'output del comando:

mount

cosa ti restituisce? , dovrebbe esserci una riga del genere:

Codice:

/dev/sdg1 on /media/PENNA type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)

...d'altronde prova a montare la penna manualmente, conviene indicare il file system prima del "jolly" -t e crearti una cartella in /mnt/PENNA, ad esempio, appunto provare  :

mkdir /mnt/PENNA

mount -t vfat /dev/sdx1 -o rw /mnt/PENNA        ----->   (...dove sdx1 è la penna)

...per sapere qual'è la penna:

fdisk -l

...per sapere l'uuid:

ls -lah /dev/disk/by-uuid

a dopo

[ask0]

alex@alex-laptop:~$ mount
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda7 on /boot type ext4 (rw)
/dev/sda8 on /home type ext4 (rw)
/dev/sda3 on /windows type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/alex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=alex)
alex@alex-laptop:~$

obbedito, ma non capisco. e non capisco nemmeno il seguito, potresti spiegarti? Al posto di PENNA devo scrivere il nome vero, kingston per es. o non ha nessuna importanza?? Scusa eh, proprio non capisco

[Argos]

e non capisco nemmeno il seguito, potresti spiegarti? Al posto di PENNA devo scrivere il nome vero, kingston per es. o non ha nessuna importanza?? Scusa eh, proprio non capisco

...  scusa tu, cercherò di spiegarmi meglio :

Il comando mount ti mostra il contenuto del file in /etc/mtab, cioè, i dispositivi e partizioni montate in tempo reale. Dall'output che hai postatto si evince che effettivamente, la penna "kingstone" non viene montata, l'output che ho postato prima:

Codice:

/dev/sdg1 on /media/PENNA type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,flush)

...è quello della mia penna, che oltre alle partizioni fisiche e virtuali del sistema, compare alla fine della restituzione del comando; mount, sul mio pc, e che anche a te avrebbe dovuto restituire una riga simile

 ------->   domande protocolari:  ( Hai modificato o aggiornato il bios per caso?  )    <-------
 ------->                                   ( avvi il sistema con la penna/penne inserita/inserite o inserisci dopo avviato il kernel? ) <----

Per montare manualmente:

...crea la cartella in /mnt :

mkdir /mnt/ (qui il nome della cartella che vuoi creare, ed usa il nome che vuoi)

ad esempio: mkdir /mnt/kingstone

...Identifica il dispositivo usb in questione:

fdisk -l  ---->   con questo output puoi identificare il device usb (la penna) , se è /dev/sdb1 o /dev/sdc1 etc...

...montaggio manuale della penna nel sotto direttorio appena creato :

mount -t vfat /dev/(nome device) -o rw /mnt/(nome dir)

...dove " -t " , serve a specificare il tipo di file system, in questo caso della penna: " vfat ", /dev/(nome device) è il nome dato dal sistema per la penna che dovrai identificare con l'output " fdisk -l ", " -o " serve ad indicare le opzioni di mount, se solo lettura o se scrittura e lettura etc, in questo caso è lettura " r " (read) e scrittura " w " (write) , cioè --> " rw " .

A parte questo, controlla se nel file /etc/group la voce; " plugdev:x:46: (utente) " , presenta effettivamente la tua utenza in (utente) , cioè, il nome che usi per il login.

A dopo